Pin extender for Hornby point motors - 1.2mm pins - (10 pack)

Please read this description carefully to ensure you order the correct part. We sell two different sizes of point motor extender pins. These are 1.2mm in diameter and will fit all known Hornby R8014 point motors and some Peco PL-10 point motors.

Most Peco PL-10 point motors have 1mm pins and you will require our 1mm pin extender. However some Peco point motors were made with a larger 1.2mm pin. These seem to those made from around 2018 onwards.

We can't be sure what type you have so if you are in any doubt, please try to measure the pin diameter or call us for advice on 0345 065 4472.

A pack of 10 pre-assembled pin extenders for use with a standard Hornby R8014 point motor to provide an extra 30mm length. This allows the point motor to be fixed under the baseboard.

The brass tube slots over the existing pin to provide up to 30mm extra length. Pin can be cut down using sharp cutters as required. The brass tube can also be crimped onto the point motor pin for extra stability.

Supplied in packs of 10.